# Sheet metal tray made to measure Quelle: > Sheet metal tray made to measure with four bends and closed corners: enter the length, width and rim height, see the price and order in the part designer. Tray with a bent-up rim. At the corners the walls meet, leaving only a narrow gap. - Price online in the part designer - Free collection in Frankfurt - In-house production [Price and order in the part designer →](https://mvg-frankfurt.de/en/part-designer?tpl=wanne&L=500&B=300&h=40&fs=eckig&t=2&mat=aluminium-almg3&qty=1&phase=fertig) - Closed corners with a narrow gap, no weld seam. - For liquids, seal the corners as well, for example with sealant. Materials: [Aluminium AlMg3](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/almg3), [Stainless steel 1.4301](https://mvg-frankfurt.de/en/sheet-metal-cutting/edelstahl/1-4301), [Steel S235JR](https://mvg-frankfurt.de/en/sheet-metal-cutting/stahl/s235jr) ## Uses: drip tray, drawer, planter tray Use sheet metal trays as drip trays under machines and vehicles, as liners for drawers and shelves, as planter or gravel trays and as cover hoods. Aluminium is light, stainless steel is food-safe and easy to clean, steel is economical and easy to paint. Tight for oil and coolant: the corners are bent closed. For liquids, seal the corners on the inside with a suitable sealant, for example polyurethane or MS polymer. Drain and fixing: place a drain hole or fixing holes in the rim directly in the part designer. You see the price there straight away. ## Frequently asked questions **Is the tray watertight?** The corners are closed, with a narrow gap and no weld seam. For liquids, seal the corners as well, for example with sealant. **Can I add holes?** Yes. In the part designer you can place holes and cut-outs in the base or rim.