# Copper in the control cabinet: E-Cu or SF-Cu?

Quelle: <https://mvg-frankfurt.de/en/magazine/copper-in-control-cabinets>

> For busbars, conductivity counts; for brazed joints, suitability for welding and brazing. Two copper grades, two tasks.

Materials

For busbars, conductivity counts; for brazed joints, suitability for welding and brazing. Two copper grades, two tasks.

MVG editorial team · Values from our production and the material standards  
Published on 3 October 2026 · 2 min read

Not all copper is the same. For a busbar in a control cabinet you need a different grade than for a brazed pipeline. The difference lies in the oxygen – and it decides conductivity and brazeability.

Problem

## The problem: conductivity or brazeability

In control cabinet construction, copper is used mainly as busbars, earthing strips or contact parts. Here as little voltage as possible should be lost and as little heat as possible generated. For pipelines and refrigeration and air-conditioning technology, on the other hand, what counts is that the copper can be brazed and welded reliably.

If you try to meet both requirements with the same grade, you either give away conductivity or risk brittle brazed joints.

Cause

## The cause: oxygen and phosphorus

E-Cu (Cu-ETP, CW004A) is electrolytic copper of conductor quality. It conducts electricity and heat almost as well as silver. However, it contains some oxygen; when brazed or welded in a reducing atmosphere it can become brittle (hydrogen embrittlement).

SF-Cu (Cu-DHP, CW024A) is deoxidised with phosphorus. As a result, it does not become brittle when brazed or welded. The phosphorus, however, lowers the electrical conductivity.

| Property | E-Cu (Cu-ETP) | SF-Cu (Cu-DHP) |
|---|---|---|
| Electrical conductivity | about 58 m/(Ω·mm²), 100 % IACS | about 45 to 50 m/(Ω·mm²) |
| Thermal conductivity | about 390 W/(m·K) | lower than E-Cu |
| Soldering / welding | very easy to solder, easy to weld | very good, without hydrogen embrittlement |
| Typical form at MVG | Flat, round and square bars | Round tubes, sheets |
| Typical use | Busbars, earthing, contact parts | Pipework, soldered joints, sheets |

Standard values to EN 13601 (Cu-ETP) and EN 1057/12449 (Cu-DHP); the certificate of the respective delivery is binding.

Solution

## The solution: E-Cu for current, SF-Cu for brazing

For busbars and earthing, choose E-Cu as flat bar. For brazed joints, tubes and sheet metal work, choose SF-Cu. Dimensioning a busbar (cross-section, current-carrying capacity, clearances) is a job for a qualified electrician and follows the relevant standards and the switchgear manufacturer’s specifications.

- Brush the contact surfaces of busbars bright before assembly.
- Copper smears when sawn: use a coarse tooth pitch and plenty of cooling.
- Soft copper bends excellently; cold forming makes it stronger and more brittle.

**Remember:** Conduct or braze: E-Cu for the busbar, SF-Cu for the brazed joint.

## At a glance

- Clarify the task: conducting current or brazing/welding
- Have a qualified electrician define the busbar cross-section
- Note the length and quantity per bar
- Clean the contact surfaces before assembly

[Go to copper semi-finished products →](https://mvg-frankfurt.de/en/semi-finished/material/kupfer)

## Matching products

[Semi-finished product **Copper flat bar E-Cu, 30 × 5 mm** Busbar, sawn to length. *Configure cut-to-size →*](https://mvg-frankfurt.de/online/profiles?art=6216&z=1000x1) · [Semi-finished product **Copper flat bar E-Cu, 20 × 5 mm** Narrower bar for smaller cross-sections. *Configure cut-to-size →*](https://mvg-frankfurt.de/online/profiles?art=6214&z=500x2) · [Material **Copper sheet SF-Cu** Cut-to-size and bent parts made of copper sheet. *View the material →*](https://mvg-frankfurt.de/en/sheet-metal-cutting/kupfer-messing/sf-cu) · [Material **E-Cu in the data sheet** Properties, applications and processing. *Read the data sheet →*](https://mvg-frankfurt.de/en/semi-finished/werkstoff/kupfer-e-cu)

## Frequently asked questions

**Which copper do I use for a busbar?**

E-Cu (Cu-ETP): it has the highest electrical conductivity, about 58 m/(Ω·mm²). We stock it as flat, round and square bar.

**Why not always E-Cu?**

E-Cu contains oxygen and can become brittle when brazed or welded in a reducing atmosphere. For brazed joints, SF-Cu is the safer choice.

**Do you state the current-carrying capacity of a busbar?**

No. Dimensioning depends on standards, the installation situation and the system manufacturer’s specifications and is the task of a qualified electrician. We supply the bar in the required cross-section and cut to length.

## Questions about your part?

Our sales team advises you on material, manufacturing and delivery time.

[Call: (069) 94 21 30 - 0](tel:+496994213000) · [Email info@mvg-frankfurt.de](mailto:info@mvg-frankfurt.de?subject=Question%20about%3A%20Copper%20in%20the%20control%20cabinet%3A%20E-Cu%20or%20SF-Cu%3F)

## Related articles

- [Profiles Profiles cut to length: the right cut in four steps Matching profile shape, material, dimensions and length correctly. 1 min read Read the article →](https://mvg-frankfurt.de/en/magazine/ordering-profiles-cut-to-length)
- [Materials Hammered aluminium sheet: production, cutting and painting Embossed pure aluminium with a lively surface: how hammered sheet is made, what it is suited to, and what to watch out for when cutting and painting. 3 min read Read the article →](https://mvg-frankfurt.de/en/magazine/hammered-aluminium-sheet)
- [Materials Brass or gunmetal? Three copper alloys compared Ms58 for turned parts, Ms63 for bending, gunmetal Rg7 for bearings and bushes: how to recognise the right copper alloy. 3 min read Read the article →](https://mvg-frankfurt.de/en/magazine/brass-or-gunmetal)