# Profiles cut to length: the right cut in four steps

Quelle: <https://mvg-frankfurt.de/en/magazine/ordering-profiles-cut-to-length>

> Matching profile shape, material, dimensions and length correctly.

Profiles

Matching profile shape, material, dimensions and length correctly.

MVG editorial team · Values from our production and the material standards  
Published on 10 September 2026 · 1 min read

## Determine the cross-section

Start with the shape: tube, bar or open profile. The profile overview shows the cross-section as a symbol. The shape search helps you find, for example, rectangular tubes, angles or aluminium profiles for machine construction. The symbol illustrates the shape; the exact dimensions are listed with each item.

## Choose material and dimensions

After the shape, choose a suitable item from the catalogue. Pay attention to the material designation and all cross-section dimensions. Two profiles that look similar can differ in material, wall thickness and intended use. For load-bearing structures, the selection in the shop does not replace professional design calculations.

## Set length and quantity

Enter the required cut length and quantity. Check the unit and the input limits shown. If you need several lengths, create separate items for them. Please clarify special processing requests with us before ordering.

## Review the whole order

Check the items in the basket once more for material, cross-section, length and quantity. The shipping options also depend on the dimensions of the order. Collection in Frankfurt is an alternative; you see the delivery methods offered and their costs during ordering.

## At a glance

- Cross-section and material are correct
- All item dimensions compared
- Length and quantity checked for each item
- Collection or an offered shipping method chosen

[Choose profiles →](https://mvg-frankfurt.de/online/profiles)

## Matching products

[configurator **Profiles cut to length** Over 1,000 semi-finished items. *Configure a profile →*](https://mvg-frankfurt.de/online/profiles)

## Questions about your part?

Our sales team advises you on material, manufacturing and delivery time.

[Call: (069) 94 21 30 - 0](tel:+496994213000) · [Email info@mvg-frankfurt.de](mailto:info@mvg-frankfurt.de?subject=Question%20about%3A%20Profiles%20cut%20to%20length%3A%20the%20right%20cut%20in%20four%20steps)

## Related articles

- [Profiles Ordering a mitre cut: which dimensions does the saw need? A clear sketch helps you avoid questions about the length, angle and orientation of your profiles. 1 min read Read the article →](https://mvg-frankfurt.de/en/magazine/ordering-a-mitre-cut)
- [Materials Copper in the control cabinet: E-Cu or SF-Cu? For busbars, conductivity counts; for brazed joints, suitability for welding and brazing. Two copper grades, two tasks. 2 min read Read the article →](https://mvg-frankfurt.de/en/magazine/copper-in-control-cabinets)
- [Materials Brass or gunmetal? Three copper alloys compared Ms58 for turned parts, Ms63 for bending, gunmetal Rg7 for bearings and bushes: how to recognise the right copper alloy. 3 min read Read the article →](https://mvg-frankfurt.de/en/magazine/brass-or-gunmetal)