# Aluminium AlMg1 anodised E6/EV1 (natural) 2.5 mm – cut to size

Quelle: <https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/almg1-eloxiert-ev1/2-5-mm>

> Aluminium AlMg1 anodised E6/EV1 (natural) 2.5 mm cut to size ✓ instant price online ✓ from 1 piece ✓ free collection in Frankfurt or shipping.

Natural anodised, matt etched: a finished visible surface with protective film.

Photo of the goods. Surface and shade may vary by batch.

Calculating price

[With cut-outs or bends](https://mvg-frankfurt.de/en/configurator/cut-to-size?l=500&b=500&t=2.5&mat=aluminium-almg1-eloxiert-ev1&qty=1) ·

- **Cutting in Frankfurt** from 1 piece, DIN ISO 2768-m
- **Free collection** or shipping, delivery time in the basket
- **Inspection certificate 3.1** on request, selectable in the basket

Price example 2.5 mm, 500 × 500 mm, 1 piece, including order fee: in the calculator

## At a glance

**Thickness**

2.5 mm

**Sheet format**

2,000 × 1,000 mm

**Weight**

6.75 kg/m²

**Cut-to-size**

square to size, from 1 piece

**Recycling**

Metal, fully recyclable

## Uses

- Trims, front panels and cladding
- Facade, parapet and flashing sheets with a natural look
- Signs and lettering carriers
- Furniture, shopfitting and exhibition stands
- [Window sill made to measure](https://mvg-frankfurt.de/en/applications/fensterbank)
- [Wall coping made to measure](https://mvg-frankfurt.de/en/applications/mauerabdeckung)
- [Drip edge / trim profile](https://mvg-frankfurt.de/en/applications/tropfkante)
- [L-angle made to measure](https://mvg-frankfurt.de/en/applications/abdeckwinkel)
- [Parapet coping made to measure](https://mvg-frankfurt.de/en/applications/attikahaube)
- [Verge flashing made to measure](https://mvg-frankfurt.de/en/applications/ortgangblech)
- [Eaves flashing made to measure](https://mvg-frankfurt.de/en/applications/traufblech)
- [Wall flashing made to measure](https://mvg-frankfurt.de/en/applications/wandanschluss)
- [Valley flashing made to measure](https://mvg-frankfurt.de/en/applications/kehlblech)
- [Plinth profile made to measure](https://mvg-frankfurt.de/en/applications/sockelprofil)
- [Aluminium wall coping](https://mvg-frankfurt.de/en/applications/mauerabdeckung-aluminium)

[**Your own shape? Draw a part** Holes, cut-outs and bends in the part designer. Instant price, from 1 piece.](https://mvg-frankfurt.de/en/part-designer?start=vorlagen&mat=aluminium-almg1-eloxiert-ev1)

[Surfaces compared](https://mvg-frankfurt.de/en/surfaces?werkstoff=aluminium) · [Calculate weight](https://mvg-frankfurt.de/en/calculators/weight)

## Thicknesses

| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| [1 mm](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/almg1-eloxiert-ev1/1-mm) | 2.7 kg/m² | [Price](https://mvg-frankfurt.de/preis/blech/almg1-eloxiert-ev1/1/500x500) | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| [1.5 mm](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/almg1-eloxiert-ev1/1-5-mm) | 4.05 kg/m² | [Price](https://mvg-frankfurt.de/preis/blech/almg1-eloxiert-ev1/1.5/500x500) | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| [2 mm](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/almg1-eloxiert-ev1/2-mm) | 5.4 kg/m² | [Price](https://mvg-frankfurt.de/preis/blech/almg1-eloxiert-ev1/2/500x500) | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| [2.5 mm](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/almg1-eloxiert-ev1/2-5-mm) | 6.75 kg/m² | [Price](https://mvg-frankfurt.de/preis/blech/almg1-eloxiert-ev1/2.5/500x500) | 2,000 × 1,000 mm |
| [3 mm](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/almg1-eloxiert-ev1/3-mm) | 8.1 kg/m² | [Price](https://mvg-frankfurt.de/preis/blech/almg1-eloxiert-ev1/3/500x500) | 2,000 × 1,000 mm · 2,500 × 1,250 mm |

Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.

## Material

EN AW-5005 is an aluminium alloy that can be anodised particularly evenly. This sheet arrives already anodised: E6 stands for the chemically pickled, matt pre-treatment, EV1 for the colourless natural shade. The surface is therefore finished: cutting, bending if required and installation are all that is needed; no further treatment.

**Key data**

|  |  |
|---|---|
| Designation | EN AW-5005 (AlMg1), half-hard, anodised E6/EV1 |
| Density | 2.7 kg/dm³ |
| Thicknesses | 1, 1.5, 2, 2.5, 3 mm |
| Surface finish | Factory-anodised, with protective film on one side; the side without film is not intended as a visible side. The configurator does not ask for the visible side. For bent parts, note in the “Note” field which side should remain visible. The natural shade may vary slightly between batches; it is best to order parts for one continuous surface together. Only peel off the film after installation. |

[Material Aluminium AlMg1 anodised E6/EV1: properties, applications, bending →](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/almg1-eloxiert-ev1)

**Tolerances**

We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. Details: [Tolerances](https://mvg-frankfurt.de/en/tolerances#tafelschere).

**Bending: minimum flange and inside radius**

| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 1 mm | 11.7 mm | 3.4 mm | 9.7 mm |
| 1.5 mm | 11.9 mm | 3.4 mm | 9.7 mm |
| 2 mm | 12.1 mm | 3.8 mm | 9.7 mm |
| 2.5 mm | 12.3 mm | 3.8 mm | 9.7 mm |
| 3 mm | 12.5 mm | 3.7 mm | 9.7 mm |

[All design rules Aluminium →](https://mvg-frankfurt.de/en/design-rules/aluminium) · [Bent parts](https://mvg-frankfurt.de/en/bent-parts)

## From our production in Frankfurt

We cut, laser and bend your sheet in-house, on Hanauer Landstraße.

**Laser cutting** Contours and cut-outs from sheet metal. [To laser cutting →](https://mvg-frankfurt.de/en/sheet-metal-cutting)

**Bending** Sheet metal parts to your flange dimensions and angles. [To bent parts →](https://mvg-frankfurt.de/en/bent-parts)

## Other Aluminium sheets

- [Aluminium AlMg3](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/almg3)
- [Aluminium AlMg4.5Mn0.7 (EN AW-5083) H111](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/en-aw-5083)
- [Aluminium Al 99.5 hammered finish H14/24](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/hammerschlag)
- [Aluminium sheet painted anthracite RAL 7016](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/lackiert-ral7016)
- [Aluminium sheet painted white RAL 9016](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/lackiert-ral9016)
- [Aluminium chequer plate](https://mvg-frankfurt.de/en/sheet-metal-cutting/aluminium/riffelblech)

[All materials for sheet metal cutting →](https://mvg-frankfurt.de/en/sheet-metal-cutting) · [Materials at a glance](https://mvg-frankfurt.de/en/materials) · Holes or cut-outs: [Part designer](https://mvg-frankfurt.de/en/part-designer)