Brass angle 40 × 40 × 3 mm, CW614N
Brass Ms58· ab 2,59 € nettoab 3,08 € brutto per piece incl. saw cut
The price follows the market price of brass.
Technical data
| Item number | 7720 |
|---|---|
| Short name | Brass angle 40x40x3 mm |
| Cross-section | 40 x 40 x 3 mm |
| Flange a | 40 mm |
| Flange b | 40 mm |
| Thickness | 3 mm |
| Material | Brass Ms58 |
| Alloy | CuZn39Pb3 (Ms58) |
| Also known as | CW614N, 2.0401 |
| Delivery condition | R400 (half-hard) |
| Dimensional standard | EN 12167 |
| Product standard (catalogue) | EN 12167 |
| Weight per metre | 2 kg/m |
| Mill length | 5 m |
REACH (Art. 33): Nach REACH-Verordnung (Art. 33) informieren wir Sie hiermit, dass das Produkt mehr als 0,1 % Blei (Pb, CAS 7439-92-1) enthält. REACH and RoHS declaration
Downloads
CAD data to nominal dimensions, sharp-edged: radii and tolerances of the standard are not shown. Inspection certificate 3.1 (EN 10204) on request with your order – please note it in the checkout under the production remarks.
Reading the dimensions
The two flange lengths and the thickness define the section. Equal flange lengths make an equal-sided angle.
Decide which flange will rest against the mating part. Allow for the inner radius if another component has to sit in the corner.
Material & processing
Check the exact material designation, the delivery condition and the surface for your application. Agree any required certificates with us before ordering.
Understanding material certificates →Same size, different material
These items have the same cross-section. Material, surface and tolerances may differ.
Before you order
How do I order my cut length?
Open the configurator with this item and enter length and quantity. For several lengths you can add further cuts. The available limits and the calculated price appear there.
What about tolerances and further machining?
Cross-section, surface and length each have their own requirements. If you need a fit, a particularly tight tolerance or a specific cut edge, agree this with us before ordering. Allow extra stock for subsequent machining if necessary.
Clarify requirements for item 7720 →Can I collect or have it delivered?
Collection is possible at Hanauer Landstraße 421 in Frankfurt. Shipping method and costs depend on length, weight and delivery address and are calculated at checkout.
Shipping and collection →Can I get a material certificate?
Please state the required certificate before ordering. We will clarify availability and assignment to the material.
Which certificate do I need? →