Copper SF-Cu 1 mm – cut to size
Highest conductivity, soft and easy to solder, also for visible parts.
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 1 mm, 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Thickness
- 1 mm
- Sheet formats
- 2,000 × 1,000 mm · 2,500 × 1,250 mm
- Weight
- 8.96 kg/m²
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Busbars, contact and earthing sheets
- Heat sinks and heat-conducting sheets
- Roof and facade details
- Crafts and decorative work
- Window sill made to measure
- Wall coping made to measure
- Parapet coping made to measure
- Verge flashing made to measure
- Eaves flashing made to measure
- Wall flashing made to measure
- Valley flashing made to measure
- Plinth profile made to measure
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 0.5 mm | 4.48 kg/m² | Price | 2,000 × 1,000 mm |
| 0.8 mm | 7.17 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 1 mm | 8.96 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 1.5 mm | 13.44 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 2 mm | 17.92 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 3 mm | 26.88 kg/m² | Price | 2,000 × 1,000 mm |
| 4 mm | 35.84 kg/m² | Price | 2,000 × 1,000 mm |
| 5 mm | 44.8 kg/m² | Price | 2,000 × 1,000 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Material
Copper is chosen for two very different reasons: for its electrical and thermal conductivity or for its appearance. SF-Cu is oxygen-free and phosphorus-deoxidised and therefore easy to solder and weld: the usual grade for sheet metal work.
Key data
| Designation | SF-Cu / Cu-DHP (CW024A) |
|---|---|
| Density | 8.96 kg/dm³ |
| Thicknesses | 0.5, 0.8, 1, 1.5, 2, 3, 4, 5 mm |
| Surface finish | Bright from the mill, it darkens within weeks. If you want to keep it as new, apply clear lacquer; if you want the patina, leave it untreated. |
Tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. Details: Tolerances.
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Other Copper and brass sheets
All materials for sheet metal cutting → · Materials at a glance · Holes or cut-outs: Part designer