Steel DD11 hot-rolled – sheet cut to size
Hot-rolled steel for cold forming, for thicker sheets.
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Thicknesses
- 5, 6, 8, 10 mm
- Sheet formats
- 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Structural parts, brackets and base plates
- Parts that are coated later
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 5 mm | 39.25 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 6 mm | 47.1 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 8 mm | 62.8 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 10 mm | 78.5 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Properties and data sheet
- Designation
- 1.0332 to DIN EN 10111, hot-rolled
- Density
- 7.85 kg/dm³
- Thicknesses
- 5, 6, 8, 10 mm
- Processing
- Laser cutting, bending, deburring
DD11 is a hot-rolled steel for cold forming. We supply it in the thicker gauges for structural parts.
Properties
- Hot-rolled, surface with mill scale
- Easy to bend and easy to weld
- Not corrosion-resistant: coat or paint
Surface finish
Hot-rolled with mill scale. Without a coating, the surface rusts.
Equivalents
1.0332 corresponds to SPHD · A621CQ · StW22 · HR3 · 1C · FeP11. All 13 designations by country and standard →
Design rules and bending
Easy to bend. The configurator checks the inside radius and minimum flange for each thickness.
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 5 mm | 39.1 mm | 8 mm | 35.9 mm |
| 6 mm | 39.1 mm | 9 mm | 35.9 mm |
All design rules Steel → ·Design guidelines → · Bend radius and minimum flange →
Cutting methods and tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. We laser-cut parts with cut-outs, holes or free contours.
Typical applications and bent parts
- Structural parts, brackets and base plates
- Parts that are coated later
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Other Steel sheets
- Weathering structural steel S355J2W (Corten steel)
- Steel DC01 cold-rolled
- Steel S235JR
- Steel DX51D+Z275 hot-dip galvanised
All materials for sheet metal cutting → · Materials at a glance · Holes or cut-outs: Part designer