Steel DX51D+Z275 hot-dip galvanised – sheet cut to size

Soft forming steel with a zinc coating: corrosion protection without further treatment.

Steel DX51D+Z275 hot-dip galvanised, surface — Photo of the goods. Surface and shade may vary by batch.

Calculating price

With cut-outs or bends ·

Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
Free collection or shipping, delivery time in the basket
Inspection certificate 3.1 on request, selectable in the basket

Price example 500 × 500 mm, 1 piece, including order fee: in the calculator

At a glance

Thicknesses: 0.75, 0.8, 1, 1.5, 2, 3 mm
Sheet formats: 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm
Cut-to-size: square to size, from 1 piece
Recycling: Metal, fully recyclable

Uses

Covers, cladding and housings outdoors
Wall and parapet copings, flashing sheets
Ventilation and installation parts
Window sill made to measure
Wall coping made to measure
Drip edge / trim profile
L-angle made to measure
Parapet coping made to measure
Verge flashing made to measure
Eaves flashing made to measure
Wall flashing made to measure
Valley flashing made to measure
Plinth profile made to measure

Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece.

Surfaces compared · Calculate weight

Thicknesses

Thickness	Weight	500 × 500 mm, 1 piece	Sheet formats
0.75 mm	5.89 kg/m²	Price	2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm
0.8 mm	6.28 kg/m²	Price	2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm
1 mm	7.85 kg/m²	Price	2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm
1.5 mm	11.78 kg/m²	Price	2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm
2 mm	15.7 kg/m²	Price	2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm
3 mm	23.55 kg/m²	Price	2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm

Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.

Properties and data sheet

Designation: DX51D+Z275 (1.0226), hot-dip galvanised to DIN EN 10346
Density: 7.85 kg/dm³
Thicknesses: 0.75, 0.8, 1, 1.5, 2, 3 mm
Processing: Laser cutting, bending, deburring

DX51D+Z275 is a soft, cold-rolled forming steel that is coated with zinc on both sides in the Sendzimir process (continuous hot-dip galvanising), 275 g/m² in total, about 20 µm per side. The thin sheet is very easy to bend and needs no further coating. That makes it the usual material for covers and cladding that stand outdoors or in damp surroundings.

Properties

Zinc coating Z275 on both sides, cathodic protection even at scratches
Soft forming steel without guaranteed yield strength: very easy to bend, not for load-bearing components
Considerably longer service life outdoors than raw steel
Welding possible, but burns off the zinc layer in the weld zone

Surface finish

Zinc layer with its typical sheen, sometimes with spangle. The steel is exposed at the cut edges, where the cathodic protection of the adjacent zinc takes effect.

Design rules and bending

Bending in all thicknesses offered (thin sheet, see table above). The zinc layer may develop fine cracks at the bend; the cathodic protection remains intact.