Steel DX51D+Z275 hot-dip galvanised 2 mm – cut to size
Soft forming steel with a zinc coating: corrosion protection without further treatment.
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 2 mm, 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Thickness
- 2 mm
- Sheet formats
- 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm
- Weight
- 15.7 kg/m²
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Covers, cladding and housings outdoors
- Wall and parapet copings, flashing sheets
- Ventilation and installation parts
- Window sill made to measure
- Wall coping made to measure
- Drip edge / trim profile
- L-angle made to measure
- Parapet coping made to measure
- Verge flashing made to measure
- Eaves flashing made to measure
- Wall flashing made to measure
- Valley flashing made to measure
- Plinth profile made to measure
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 0.75 mm | 5.89 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 0.8 mm | 6.28 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 1 mm | 7.85 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 1.5 mm | 11.78 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 2 mm | 15.7 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 3 mm | 23.55 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Material
DX51D+Z275 is a soft, cold-rolled forming steel that is coated with zinc on both sides in the Sendzimir process (continuous hot-dip galvanising), 275 g/m² in total, about 20 µm per side. The thin sheet is very easy to bend and needs no further coating. That makes it the usual material for covers and cladding that stand outdoors or in damp surroundings.
Key data
| Designation | DX51D+Z275 (1.0226), hot-dip galvanised to DIN EN 10346 |
|---|---|
| Density | 7.85 kg/dm³ |
| Thicknesses | 0.75, 0.8, 1, 1.5, 2, 3 mm |
| Surface finish | Zinc layer with its typical sheen, sometimes with spangle. The steel is exposed at the cut edges, where the cathodic protection of the adjacent zinc takes effect. |
Material Galvanised steel sheet DX51D+Z275: properties, applications, bending →
Tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. Details: Tolerances.
Bending: minimum flange and inside radius
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 0.8 mm | 11.7 mm | 1.6 mm | 9.7 mm |
| 1 mm | 11.7 mm | 2.8 mm | 9.7 mm |
| 1.5 mm | 11.9 mm | 3.3 mm | 9.7 mm |
| 2 mm | 9.4 mm | 2 mm | 7.4 mm |
| 3 mm | 17.9 mm | 4.9 mm | 14.6 mm |
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Other Steel sheets
- Weathering structural steel S355J2W (Corten steel)
- Steel DC01 cold-rolled
- Steel DD11 hot-rolled
- Steel S235JR
All materials for sheet metal cutting → · Materials at a glance · Holes or cut-outs: Part designer