Steel S235JR 10 mm – cut to size
The standard structural steel: easy to weld, easy to form, economical.
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 10 mm, 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Thickness
- 10 mm
- Sheet formats
- 2,000 × 1,000 mm · 2,500 × 1,250 mm · 2,000 × 600 mm
- Weight
- 78.5 kg/m²
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Brackets, holders and machine parts
- Frames, base plates and reinforcements
- Repair and spare parts
- Anything that is painted or powder-coated afterwards
- L-angle made to measure
- Sheet metal tray made to measure
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 1 mm | 7.85 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 1.5 mm | 11.78 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 2 mm | 15.7 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 3 mm | 23.55 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 4 mm | 31.4 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 5 mm | 39.25 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 6 mm | 47.1 kg/m² | Price | 2,000 × 1,000 mm |
| 8 mm | 62.8 kg/m² | Price | 2,000 × 1,000 mm |
| 10 mm | 78.5 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 2,000 × 600 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Material
S235JR is the most widely used unalloyed structural steel and our standard material for blanks and bent parts. It can be welded, bent, drilled and painted without any of these operations requiring special knowledge. For most structural, mechanical engineering and repair work it is therefore the economical choice.
Key data
| Designation | 1.0038 to DIN EN 10025-2 |
|---|---|
| Density | 7.85 kg/dm³ |
| Thicknesses | 1, 1.5, 2, 3, 4, 5, 6, 8, 10 mm |
| Surface finish | Bright, pickled surface with a light film of oil from the mill. Raw steel starts to rust in damp air within a few days. Plan a coating if the part remains visible. |
Tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. Details: Tolerances.
Bending: minimum flange and inside radius
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 1 mm | 11.7 mm | 2.8 mm | 9.7 mm |
| 1.5 mm | 11.9 mm | 3.3 mm | 9.7 mm |
| 2 mm | 9.4 mm | 2 mm | 7.4 mm |
| 3 mm | 17.9 mm | 4.9 mm | 14.6 mm |
| 4 mm | 17.9 mm | 4 mm | 14.6 mm |
| 5 mm | 39.1 mm | 8 mm | 35.9 mm |
| 6 mm | 39.1 mm | 9 mm | 35.9 mm |
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Other Steel sheets
- Weathering structural steel S355J2W (Corten steel)
- Steel DC01 cold-rolled
- Steel DD11 hot-rolled
- Steel DX51D+Z275 hot-dip galvanised
All materials for sheet metal cutting → · Materials at a glance · Holes or cut-outs: Part designer