Stainless steel 1.4016 magnetic (2R) (AISI 430) 1 mm – cut to size
Ferritic stainless steel, magnetic: the surface for magnetic boards.
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 1 mm, 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Material
- EN 10088-2
- Thickness
- 1 mm
- Sheet format
- 2,000 × 1,000 mm
- Weight
- 8 kg/m²
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Magnetic board and magnetic wall made to measure
- Pinboard, weekly planner and memo board
- Kitchen splashback with magnetic function
- Interior cladding
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 1 mm | 8 kg/m² | Price | 2,000 × 1,000 mm |
| 1.5 mm | 12 kg/m² | Price | 2,000 × 1,000 mm |
| 2 mm | 16 kg/m² | Price | 2,000 × 1,000 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Material
1.4016 is a ferritic chromium steel without nickel. Unlike 1.4301, it is magnetic: magnets hold securely on the surface. With its glossy 2R surface, the sheet is the first choice for magnetic boards, magnetic walls and pinboards in kitchen, office and children's room.
Key data
| Designation | 1.4016 (X6Cr17, AISI 430) to DIN EN 10088-2, 2R surface, film on one side |
|---|---|
| Density | 8 kg/dm³ |
| Thicknesses | 1, 1.5, 2 mm |
| Surface finish | Bright-annealed on one side (2R) with protective film. Intended for indoor use; for outdoors and damp areas choose 1.4301. Only peel off the film after installation. |
Material Stainless steel 1.4016 magnetic (2R): properties, applications, bending →
Tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. Details: Tolerances.
Bending: minimum flange and inside radius
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 1 mm | 11.7 mm | 3.5 mm | 9.7 mm |
| 1.5 mm | 11.9 mm | 3.7 mm | 9.7 mm |
| 2 mm | 12.1 mm | 3.8 mm | 9.7 mm |
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Other Stainless steel sheets
- Stainless steel 1.4301
- Stainless steel 1.4301 brushed
- Stainless steel 1.4301 mirror finish (2R)
- Stainless steel 1.4571
- Stainless steel 1.4571 brushed K240
All materials for sheet metal cutting → · Materials at a glance· Stainless steel grades compared · Holes or cut-outs: Part designer