Stainless steel 1.4571 (V4A, AISI 316Ti) – sheet cut to size
Molybdenum-alloyed stainless steel (V4A) for chlorides, coastal areas and road salt.
Surface finish
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Material
- EN 10088-2
- Thicknesses
- 0.5, 0.8, 1, 1.5, 2, 3, 4, 5, 6 mm
- Sheet formats
- 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Components at the coast, in swimming pools and in areas with de-icing salt
- Food, chemical and pharmaceutical plants
- Outdoor covers and fittings
- Boat fittings and parts in contact with salt water
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 0.5 mm | 4 kg/m² | Price | 2,000 × 1,000 mm |
| 0.8 mm | 6.4 kg/m² | Price | 2,000 × 1,000 mm |
| 1 mm | 8 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 1.5 mm | 12 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 2 mm | 16 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 3 mm | 24 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 4 mm | 32 kg/m² | Price | 2,000 × 1,000 mm |
| 5 mm | 40 kg/m² | Price | 2,000 × 1,000 mm |
| 6 mm | 48 kg/m² | Price | 2,000 × 1,000 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Properties and data sheet
- Designation
- 1.4571 (X6CrNiMoTi17-12-2) to DIN EN 10088-2, commonly known as V4A
- Density
- 8 kg/dm³
- Thicknesses
- 0.5, 0.8, 1, 1.5, 2, 3, 4, 5, 6 mm
- Processing
- Laser cutting, bending, deburring
1.4571 is the molybdenum-bearing stainless steel for environments where 1.4301 reaches its limits: chlorides from sea air, de-icing salt or swimming pool air trigger pitting much later. Titanium stabilisation also makes it insensitive to intergranular corrosion after welding. It costs more than 1.4301; you choose it when the environment demands it.
Properties
- About 2 % molybdenum: resistant to pitting from chlorides
- Titanium-stabilised, therefore insensitive to intergranular corrosion after welding
- Not magnetic as delivered; slightly magnetisable by cold forming
- Work-hardens during forming and springs back more than steel when bent
Surface finish
Mill finish (2B). For visible parts we also supply 1.4571 brushed on one side with grit 240 (K240); in the configurator choose “Stainless steel 1.4571 brushed K240” and the visible side.
Equivalents
1.4571 corresponds to AISI 316Ti · 316Ti · A5 · V4A · 0Cr18Ni12Mo2Ti · 320S31. All 22 designations by country and standard →
Design rules and bending
Bending as for 1.4301: because of springback, the inside radius is larger than with structural steel. The values for each thickness are in the design guidelines; the configurator checks the geometry automatically.
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 0.5 mm | 8 mm | 1 mm | 5 mm |
| 0.8 mm | 11.7 mm | 1.6 mm | 9.7 mm |
| 1 mm | 11.7 mm | 3.5 mm | 9.7 mm |
| 1.5 mm | 11.9 mm | 3.7 mm | 9.7 mm |
| 2 mm | 12.1 mm | 3.8 mm | 9.7 mm |
| 3 mm | 17.9 mm | 5.7 mm | 14.6 mm |
| 4 mm | 20.7 mm | 6.7 mm | 18.1 mm |
| 5 mm | 39.1 mm | 10.4 mm | 35.9 mm |
| 6 mm | 39.1 mm | 9 mm | 35.9 mm |
All design rules Stainless steel → ·Design guidelines → · Bend radius and minimum flange →
Cutting methods and tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. We laser-cut parts with cut-outs, holes or free contours.
Typical applications and bent parts
- Components at the coast, in swimming pools and in areas with de-icing salt
- Food, chemical and pharmaceutical plants
- Outdoor covers and fittings
- Boat fittings and parts in contact with salt water
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Questions
Is 1.4571 V4A or AISI 316Ti?
Yes. 1.4571 (V4A) corresponds to AISI 316Ti. Sheet to EN 10088-2.
Which surfaces are available online?
2B, brushed K240. Further versions on quotation in the Sheet metal range.
Is an inspection certificate 3.1 available?
Yes, if a certificate to EN 10204 is on file for the material: as an option in the basket, €15 net per order.
Why is there lettering on my stainless steel part?
Stainless steel sheets carry a mill marking with material and heat number. This is normal and links your part to the inspection certificate. The rolling mill determines where the marking sits on the sheet. Deburring or grinding weakens it, but it may still show through. You can remove the marking without residue using cellulose thinner and a clean cloth.
Other Stainless steel sheets
- Stainless steel 1.4016 magnetic (2R)
- Stainless steel 1.4301
- Stainless steel 1.4301 brushed
- Stainless steel 1.4301 mirror finish (2R)
- Stainless steel 1.4571 brushed K240
Related articles
Go to the magazine →- Materials · 2 min Not all stainless steel is the same: 1.4301, 1.4305, 1.4307 and 1.4571 Four stainless steel grades, four strengths: welding, turning, chlorides. Which grade suits which semi-finished product.
- Materials · 1 min V2A or V4A: choosing stainless steel by application The generic names alone are not enough for an order. The material number and the operating conditions make your enquiry unambiguous.
- Materials · 4 min Material certificates: 2.1, 2.2, 3.1 and 3.2 explained Which document do you need for your delivery? Clarify this before you order, so that the material and the certificate match.
All materials for sheet metal cutting → · Materials at a glance· Stainless steel grades compared · Holes or cut-outs: Part designer