Stainless steel 1.4301 brushed (V2A, AISI 304) – sheet cut to size
Same material with a decorative brushed surface for visible parts.
Surface finish
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Material
- EN 10088-2
- Thicknesses
- 0.8, 1, 1.5, 2, 2.5, 3, 5 mm
- Sheet formats
- 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Kitchen splashbacks and worktop covers
- Appliance fronts, trims and signage
- Furniture and shop fitting
- Anything mounted where it can be seen
- Window sill made to measure
- Wall coping made to measure
- L-angle made to measure
- Parapet coping made to measure
- Verge flashing made to measure
- Eaves flashing made to measure
- Wall flashing made to measure
- Valley flashing made to measure
- Plinth profile made to measure
- Stainless steel window sill
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 0.8 mm | 6.4 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 1 mm | 8 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 1.5 mm | 12 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 2 mm | 16 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 2.5 mm | 20 kg/m² | Price | 2,000 × 1,000 mm |
| 3 mm | 24 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 5 mm | 40 kg/m² | Price | 2,000 × 1,000 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Properties and data sheet
- Designation
- 1.4301 (X5CrNi18-10), brushed surface
- Density
- 8 kg/dm³
- Thicknesses
- 0.8, 1, 1.5, 2, 2.5, 3, 5 mm
- Processing
- Laser cutting, bending, deburring
Identical in material to 1.4301, but with a directional brushed surface: the even grain makes the sheet a visible part and hides signs of use better than a mill-finish surface. The right choice wherever the part will be seen later, from kitchen splashbacks to appliance fronts.
Properties
- Directional brushed surface, even appearance
- Corrosion resistance as 1.4301
- Protective film stays on the visible side until installation
- The grain direction matters for the design: keep it in mind for multi-part assemblies
Surface finish
Brushed on one side, with protective film. The back is mill finish. Peel off the film soon after installation, otherwise the adhesive hardens.
Equivalents
1.4301 corresponds to AISI 304 · UNS S30400 · SUS304 · A2 · 18-10 · 0Cr18Ni9. All 42 designations by country and standard →
Design rules and bending
Bending up to 6 mm sheet thickness. When bending, the brushed side should be on the outside; you choose the visible side in the configurator.
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 0.8 mm | 11.7 mm | 1.6 mm | 9.7 mm |
| 1 mm | 11.7 mm | 3.5 mm | 9.7 mm |
| 1.5 mm | 11.9 mm | 3.7 mm | 9.7 mm |
| 2 mm | 12.1 mm | 3.8 mm | 9.7 mm |
| 2.5 mm | 12.3 mm | 3.8 mm | 9.7 mm |
| 3 mm | 17.9 mm | 5.7 mm | 14.6 mm |
| 5 mm | 39.1 mm | 10.4 mm | 35.9 mm |
All design rules Stainless steel → ·Design guidelines → · Bend radius and minimum flange →
Cutting methods and tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. We laser-cut parts with cut-outs, holes or free contours.
Typical applications and bent parts
- Kitchen splashbacks and worktop covers
- Appliance fronts, trims and signage
- Furniture and shop fitting
- Anything mounted where it can be seen
Bent parts to size from Stainless steel 1.4301 brushed
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Questions
Is 1.4301 V2A or AISI 304?
Yes. 1.4301 (V2A) corresponds to AISI 304. Sheet to EN 10088-2.
Which surfaces are available online?
2B, brushed K240, 2R with film. Further versions on quotation in the Sheet metal range.
Is an inspection certificate 3.1 available?
Yes, if a certificate to EN 10204 is on file for the material: as an option in the basket, €15 net per order.
Why is there lettering on my stainless steel part?
Stainless steel sheets carry a mill marking with material and heat number. This is normal and links your part to the inspection certificate. The rolling mill determines where the marking sits on the sheet. Deburring or grinding weakens it, but it may still show through. You can remove the marking without residue using cellulose thinner and a clean cloth.
Other Stainless steel sheets
- Stainless steel 1.4016 magnetic (2R)
- Stainless steel 1.4301
- Stainless steel 1.4301 mirror finish (2R)
- Stainless steel 1.4571
- Stainless steel 1.4571 brushed K240
Related articles
Go to the magazine →- Materials · 2 min Not all stainless steel is the same: 1.4301, 1.4305, 1.4307 and 1.4571 Four stainless steel grades, four strengths: welding, turning, chlorides. Which grade suits which semi-finished product.
- Materials · 4 min Material certificates: 2.1, 2.2, 3.1 and 3.2 explained Which document do you need for your delivery? Clarify this before you order, so that the material and the certificate match.
- Materials · 1 min V2A or V4A: choosing stainless steel by application The generic names alone are not enough for an order. The material number and the operating conditions make your enquiry unambiguous.
All materials for sheet metal cutting → · Materials at a glance· Stainless steel grades compared · Holes or cut-outs: Part designer