Stainless steel 1.4016 magnetic (2R) (AISI 430) – sheet cut to size
Ferritic stainless steel, magnetic: the surface for magnetic boards.
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Material
- EN 10088-2
- Thicknesses
- 1, 1.5, 2 mm
- Sheet format
- 2,000 × 1,000 mm
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Magnetic board and magnetic wall made to measure
- Pinboard, weekly planner and memo board
- Kitchen splashback with magnetic function
- Interior cladding
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 1 mm | 8 kg/m² | Price | 2,000 × 1,000 mm |
| 1.5 mm | 12 kg/m² | Price | 2,000 × 1,000 mm |
| 2 mm | 16 kg/m² | Price | 2,000 × 1,000 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Properties and data sheet
- Designation
- 1.4016 (X6Cr17, AISI 430) to DIN EN 10088-2, 2R surface, film on one side
- Density
- 8 kg/dm³
- Thicknesses
- 1, 1.5, 2 mm
- Processing
- Laser cutting, bending, deburring
1.4016 is a ferritic chromium steel without nickel. Unlike 1.4301, it is magnetic: magnets hold securely on the surface. With its glossy 2R surface, the sheet is the first choice for magnetic boards, magnetic walls and pinboards in kitchen, office and children's room.
Properties
- Magnetic; magnets hold directly on the surface
- Nickel-free, ferritic chromium steel
- For indoor use: kitchen, office, living room
- Protective film on one side; the film-covered side is the visible side
Surface finish
Bright-annealed on one side (2R) with protective film. Intended for indoor use; for outdoors and damp areas choose 1.4301. Only peel off the film after installation.
Equivalents
1.4016 corresponds to AISI 430 · UNS S43000 · SUS430 · 1Cr15 · 430S17 · Z8C17. All 13 designations by country and standard →
Design rules and bending
Bending up to 2 mm is possible; the protective film stays on the sheet. Put the visible side on the outside.
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 1 mm | 11.7 mm | 3.5 mm | 9.7 mm |
| 1.5 mm | 11.9 mm | 3.7 mm | 9.7 mm |
| 2 mm | 12.1 mm | 3.8 mm | 9.7 mm |
All design rules Stainless steel → ·Design guidelines → · Bend radius and minimum flange →
Cutting methods and tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. We laser-cut parts with cut-outs, holes or free contours.
Typical applications and bent parts
- Magnetic board and magnetic wall made to measure
- Pinboard, weekly planner and memo board
- Kitchen splashback with magnetic function
- Interior cladding
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Questions
Is 1.4016 AISI 430?
Yes. 1.4016 corresponds to AISI 430. Sheet to EN 10088-2.
Which surfaces are available online?
2R with film. Further versions on quotation in the Sheet metal range.
Is an inspection certificate 3.1 available?
Yes, if a certificate to EN 10204 is on file for the material: as an option in the basket, €15 net per order.
Why is there lettering on my stainless steel part?
Stainless steel sheets carry a mill marking with material and heat number. This is normal and links your part to the inspection certificate. The rolling mill determines where the marking sits on the sheet. Deburring or grinding weakens it, but it may still show through. You can remove the marking without residue using cellulose thinner and a clean cloth.
Other Stainless steel sheets
- Stainless steel 1.4301
- Stainless steel 1.4301 brushed
- Stainless steel 1.4301 mirror finish (2R)
- Stainless steel 1.4571
- Stainless steel 1.4571 brushed K240
Related articles
Go to the magazine →- Materials · 2 min Not all stainless steel is the same: 1.4301, 1.4305, 1.4307 and 1.4571 Four stainless steel grades, four strengths: welding, turning, chlorides. Which grade suits which semi-finished product.
- Materials · 4 min Material certificates: 2.1, 2.2, 3.1 and 3.2 explained Which document do you need for your delivery? Clarify this before you order, so that the material and the certificate match.
- Materials · 1 min V2A or V4A: choosing stainless steel by application The generic names alone are not enough for an order. The material number and the operating conditions make your enquiry unambiguous.
All materials for sheet metal cutting → · Materials at a glance· Stainless steel grades compared · Holes or cut-outs: Part designer