Stainless steel 1.4301 brushed (V2A, AISI 304) 2.5 mm – cut to size
Same material with a decorative brushed surface for visible parts.
Surface finish
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 2.5 mm, 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Material
- EN 10088-2
- Thickness
- 2.5 mm
- Sheet format
- 2,000 × 1,000 mm
- Weight
- 20 kg/m²
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Kitchen splashbacks and worktop covers
- Appliance fronts, trims and signage
- Furniture and shop fitting
- Anything mounted where it can be seen
- Window sill made to measure
- Wall coping made to measure
- L-angle made to measure
- Parapet coping made to measure
- Verge flashing made to measure
- Eaves flashing made to measure
- Wall flashing made to measure
- Valley flashing made to measure
- Plinth profile made to measure
- Stainless steel window sill
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 0.8 mm | 6.4 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 1 mm | 8 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 1.5 mm | 12 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 2 mm | 16 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 2.5 mm | 20 kg/m² | Price | 2,000 × 1,000 mm |
| 3 mm | 24 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 5 mm | 40 kg/m² | Price | 2,000 × 1,000 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Material
Identical in material to 1.4301, but with a directional brushed surface: the even grain makes the sheet a visible part and hides signs of use better than a mill-finish surface. The right choice wherever the part will be seen later, from kitchen splashbacks to appliance fronts.
Key data
| Designation | 1.4301 (X5CrNi18-10), brushed surface |
|---|---|
| Density | 8 kg/dm³ |
| Thicknesses | 0.8, 1, 1.5, 2, 2.5, 3, 5 mm |
| Surface finish | Brushed on one side, with protective film. The back is mill finish. Peel off the film soon after installation, otherwise the adhesive hardens. |
Material Stainless steel 1.4301 brushed: properties, applications, bending →
Tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. Details: Tolerances.
Bending: minimum flange and inside radius
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 0.8 mm | 11.7 mm | 1.6 mm | 9.7 mm |
| 1 mm | 11.7 mm | 3.5 mm | 9.7 mm |
| 1.5 mm | 11.9 mm | 3.7 mm | 9.7 mm |
| 2 mm | 12.1 mm | 3.8 mm | 9.7 mm |
| 2.5 mm | 12.3 mm | 3.8 mm | 9.7 mm |
| 3 mm | 17.9 mm | 5.7 mm | 14.6 mm |
| 5 mm | 39.1 mm | 10.4 mm | 35.9 mm |
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Other Stainless steel sheets
- Stainless steel 1.4016 magnetic (2R)
- Stainless steel 1.4301
- Stainless steel 1.4301 mirror finish (2R)
- Stainless steel 1.4571
- Stainless steel 1.4571 brushed K240
All materials for sheet metal cutting → · Materials at a glance· Stainless steel grades compared · Holes or cut-outs: Part designer