Stainless steel 1.4301 mirror finish (2R) (V2A, AISI 304) 3 mm – cut to size
Bright-annealed, highly reflective surface with protective film.
Surface finish
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 3 mm, 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Material
- EN 10088-2
- Thickness
- 3 mm
- Sheet format
- 2,000 × 1,000 mm
- Weight
- 24 kg/m²
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Safety mirrors for playgrounds, nurseries and children's rooms
- Mirrors in sports halls, gyms and changing rooms
- Trims, decorative and reflector surfaces
- Furniture, shopfitting and exhibition stands
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 1 mm | 8 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 1.5 mm | 12 kg/m² | Price | 2,000 × 1,000 mm |
| 2 mm | 16 kg/m² | Price | 2,000 × 1,000 mm |
| 3 mm | 24 kg/m² | Price | 2,000 × 1,000 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Material
Identical in material to 1.4301, but bright-annealed: the 2R surface is highly glossy and clearly reflective. As a stainless steel mirror, the sheet is shatterproof and does not splinter. That makes it ideal for playgrounds, children's rooms, sports halls and wherever glass is too dangerous.
Key data
| Designation | 1.4301 (X5CrNi18-10), 2R bright-annealed surface, film on one side |
|---|---|
| Density | 8 kg/dm³ |
| Thicknesses | 1, 1.5, 2, 3 mm |
| Surface finish | Mirror finish on one side with protective film. A stainless steel mirror reflects clearly but shows the image a little softer than a glass mirror. Bond it over a large area to a flat board so that the reflection stays steady. Only peel off the film after installation. |
Material Stainless steel 1.4301 mirror finish (2R): properties, applications, bending →
Tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. Details: Tolerances.
Bending: minimum flange and inside radius
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 1 mm | 11.7 mm | 3.5 mm | 9.7 mm |
| 1.5 mm | 11.9 mm | 3.7 mm | 9.7 mm |
| 2 mm | 12.1 mm | 3.8 mm | 9.7 mm |
| 3 mm | 17.9 mm | 5.7 mm | 14.6 mm |
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Other Stainless steel sheets
- Stainless steel 1.4016 magnetic (2R)
- Stainless steel 1.4301
- Stainless steel 1.4301 brushed
- Stainless steel 1.4571
- Stainless steel 1.4571 brushed K240
All materials for sheet metal cutting → · Materials at a glance· Stainless steel grades compared · Holes or cut-outs: Part designer