Stainless steel 1.4301 (V2A, AISI 304) 6 mm – cut to size
The classic stainless steel for indoor and outdoor use.
Surface finish
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 6 mm, 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Material
- EN 10088-2
- Thickness
- 6 mm
- Sheet formats
- 2,000 × 1,000 mm · 2,500 × 1,250 mm
- Weight
- 48 kg/m²
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Kitchens, catering and food sector
- Covers, trims and visible parts
- Plant and apparatus engineering
- Outdoor applications where appearance matters
- Window sill made to measure
- Wall coping made to measure
- Drip edge / trim profile
- L-angle made to measure
- Parapet coping made to measure
- Verge flashing made to measure
- Eaves flashing made to measure
- Wall flashing made to measure
- Valley flashing made to measure
- Plinth profile made to measure
- Gravel stop made to measure
- Sheet metal tray made to measure
- Stainless steel window sill
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 0.5 mm | 4 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 0.8 mm | 6.4 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 1 mm | 8 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 1.5 mm | 12 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 2 mm | 16 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 3 mm | 24 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 4 mm | 32 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 5 mm | 40 kg/m² | Price | 2,000 × 1,000 mm |
| 6 mm | 48 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Material
1.4301 is the most widely used stainless steel and covers most applications where corrosion resistance or a clean appearance matters. It is food-safe, easy to weld and keeps its surface for years – practically permanently indoors, and outdoors too away from sea air and de-icing salt.
Key data
| Designation | 1.4301 (X5CrNi18-10), commonly known as V2A |
|---|---|
| Density | 8 kg/dm³ |
| Thicknesses | 0.5, 0.8, 1, 1.5, 2, 3, 4, 5, 6 mm |
| Surface finish | Mill finish (2B), without protective film. For visible surfaces we supply the same material brushed (grit 240). |
Material Stainless steel 1.4301: properties, applications, bending →
Tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. Details: Tolerances.
Bending: minimum flange and inside radius
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 0.5 mm | 8 mm | 1 mm | 5 mm |
| 0.8 mm | 11.7 mm | 1.6 mm | 9.7 mm |
| 1 mm | 11.7 mm | 3.5 mm | 9.7 mm |
| 1.5 mm | 11.9 mm | 3.7 mm | 9.7 mm |
| 2 mm | 12.1 mm | 3.8 mm | 9.7 mm |
| 3 mm | 17.9 mm | 5.7 mm | 14.6 mm |
| 4 mm | 20.7 mm | 6.7 mm | 18.1 mm |
| 5 mm | 39.1 mm | 10.4 mm | 35.9 mm |
| 6 mm | 39.1 mm | 9 mm | 35.9 mm |
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Other Stainless steel sheets
- Stainless steel 1.4016 magnetic (2R)
- Stainless steel 1.4301 brushed
- Stainless steel 1.4301 mirror finish (2R)
- Stainless steel 1.4571
- Stainless steel 1.4571 brushed K240
All materials for sheet metal cutting → · Materials at a glance· Stainless steel grades compared · Holes or cut-outs: Part designer