Stainless steel 1.4571 brushed K240 (V4A, AISI 316Ti) 2 mm – cut to size
V4A brushed on one side, grit 240: visible parts for coastal areas, swimming pools and road salt.
Surface finish
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 2 mm, 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Material
- EN 10088-2
- Thickness
- 2 mm
- Sheet formats
- 2,000 × 1,000 mm · 2,500 × 1,250 mm
- Weight
- 16 kg/m²
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Visible components at the coast, in swimming pools and in areas with de-icing salt
- Outdoor trims and covers
- Food and catering sector where appearance matters
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 2 mm | 16 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm |
| 2.5 mm | 20 kg/m² | Price | 2,500 × 1,250 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Material
Identical in material to 1.4571, but with a brushed surface on one side (grit 240). The sheet thus combines the chloride resistance of molybdenum-bearing stainless steel with an even visible surface – for visible parts in environments where 1.4301 reaches its limits.
Key data
| Designation | 1.4571 (X6CrNiMoTi17-12-2) to DIN EN 10088-2, brushed on one side, grit 240 |
|---|---|
| Density | 8 kg/dm³ |
| Thicknesses | 2, 2.5 mm |
| Surface finish | Brushed on one side (grit 240); the back is not brushed. The grain direction matters for the design: please keep it in mind for multi-part assemblies. |
Material Stainless steel 1.4571 brushed K240: properties, applications, bending →
Tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. Details: Tolerances.
Bending: minimum flange and inside radius
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 2 mm | 12.1 mm | 3.8 mm | 9.7 mm |
| 2.5 mm | 12.3 mm | 3.8 mm | 9.7 mm |
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Other Stainless steel sheets
- Stainless steel 1.4016 magnetic (2R)
- Stainless steel 1.4301
- Stainless steel 1.4301 brushed
- Stainless steel 1.4301 mirror finish (2R)
- Stainless steel 1.4571
All materials for sheet metal cutting → · Materials at a glance· Stainless steel grades compared · Holes or cut-outs: Part designer