Aluminium sheet painted anthracite RAL 7016 1 mm – cut to size
Coated in anthracite grey: the standard colour for façades and windows.
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 1 mm, 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Thickness
- 1 mm
- Sheet format
- 2,500 × 1,250 mm
- Weight
- 2.7 kg/m²
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Window sills, flashing sheets and parapet copings
- Facade and roof details
- Cladding that should match the windows in colour
- Window sill made to measure
- Wall coping made to measure
- Drip edge / trim profile
- L-angle made to measure
- Parapet coping made to measure
- Verge flashing made to measure
- Eaves flashing made to measure
- Wall flashing made to measure
- Valley flashing made to measure
- Plinth profile made to measure
- Aluminium wall coping
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 1 mm | 2.7 kg/m² | Price | 2,500 × 1,250 mm |
| 1.5 mm | 4.05 kg/m² | Price | 3,000 × 1,500 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Material
RAL 7016 anthracite grey is the colour in which most windows, doors and facade elements are made today. As coil-coated aluminium sheet, it lets you make flashings, covers and cladding that match the existing building in colour.
Key data
| Designation | Aluminium, coil-coated in RAL 7016 |
|---|---|
| Density | 2.7 kg/dm³ |
| Thicknesses | 1, 1.5 mm |
| Surface finish | Factory-painted, with protective film. Only peel off the film after installation. |
Material Aluminium painted RAL 7016: properties, applications, bending →
Tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. Details: Tolerances.
Bending: minimum flange and inside radius
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 1 mm | 11.7 mm | 3.4 mm | 9.7 mm |
| 1.5 mm | 11.9 mm | 3.4 mm | 9.7 mm |
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Other Aluminium sheets
- Aluminium AlMg1 anodised E6/EV1 (natural)
- Aluminium AlMg3
- Aluminium AlMg4.5Mn0.7 (EN AW-5083) H111
- Aluminium Al 99.5 hammered finish H14/24
- Aluminium sheet painted white RAL 9016
- Aluminium chequer plate
All materials for sheet metal cutting → · Materials at a glance · Holes or cut-outs: Part designer