Aluminium AlMg4.5Mn0.7 (EN AW-5083) H111 – sheet cut to size
Strong, seawater-resistant aluminium alloy for plates and structures.
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Thicknesses
- 3, 4, 5, 6, 8 mm
- Sheet formats
- 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Shipbuilding and vehicle construction
- Fixtures and plates for structures
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 3 mm | 7.98 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 4 mm | 10.64 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 5 mm | 13.3 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 6 mm | 15.96 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 8 mm | 21.28 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Properties and data sheet
- Designation
- EN AW-5083 (AlMg4.5Mn0.7), temper H111
EN AW numbers explained - Density
- 2.66 kg/dm³
- Thicknesses
- 3, 4, 5, 6, 8 mm
- Processing
- Laser cutting, bending, deburring
EN AW-5083 has the highest strength of the non-heat-treatable aluminium alloys. It is highly resistant to seawater and very easy to weld.
Properties
- Higher strength than AlMg3
- Highly resistant to seawater
- Very easy to weld
- Bending only to a limited extent: larger inside radii needed
Surface finish
Mill finish. Colour and gloss may vary slightly between batches.
Equivalents
EN AW-5083 corresponds to UNS A95083 · 5083 · AlMg4.5 · AlMg4.5Mn · AlMg4.5Mn0.7 · 3.3547. All 12 designations by country and standard →
Design rules and bending
Bending is possible only to a limited extent. The configurator checks the geometry for each thickness.
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 3 mm | 12.5 mm | 3.7 mm | 9.7 mm |
| 4 mm | 20.7 mm | 4 mm | 18.1 mm |
| 5 mm | 20.7 mm | 6.5 mm | 18.1 mm |
| 6 mm | 20.7 mm | 9 mm | 21 mm |
| 8 mm | 39.1 mm | 12 mm | 35.9 mm |
All design rules Aluminium → ·Design guidelines → · Bend radius and minimum flange →
Cutting methods and tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. We laser-cut parts with cut-outs, holes or free contours.
Typical applications and bent parts
- Shipbuilding and vehicle construction
- Fixtures and plates for structures
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Other Aluminium sheets
- Aluminium AlMg1 anodised E6/EV1 (natural)
- Aluminium AlMg3
- Aluminium Al 99.5 hammered finish H14/24
- Aluminium sheet painted anthracite RAL 7016
- Aluminium sheet painted white RAL 9016
- Aluminium chequer plate
Related articles
Go to the magazine →- Materials · 3 min Hammered aluminium sheet: production, cutting and painting Embossed pure aluminium with a lively surface: how hammered sheet is made, what it is suited to, and what to watch out for when cutting and painting.
- Materials · 3 min Aluminium: properties and alloys What makes aluminium special, how the alloy groups 1000 to 7000 differ, and which grade suits sheet, profile or turned part.
- Materials · 4 min Material certificates: 2.1, 2.2, 3.1 and 3.2 explained Which document do you need for your delivery? Clarify this before you order, so that the material and the certificate match.
All materials for sheet metal cutting → · Materials at a glance · Holes or cut-outs: Part designer