Aluminium sheet painted white RAL 9016 2 mm – cut to size
Coated in traffic white: a finished visible surface without further treatment.
Calculating price
- Cutting in Frankfurt from 1 piece, DIN ISO 2768-m
- Free collection or shipping, delivery time in the basket
- Inspection certificate 3.1 on request, selectable in the basket
Price example 2 mm, 500 × 500 mm, 1 piece, including order fee: in the calculator
At a glance
- Thickness
- 2 mm
- Sheet formats
- 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm
- Weight
- 5.4 kg/m²
- Cut-to-size
- square to size, from 1 piece
- Recycling
- Metal, fully recyclable
Uses
- Cladding and trims for interiors
- Covers on equipment and furniture
- Shopfitting and exhibition stands
- Window sill made to measure
- Wall coping made to measure
- Drip edge / trim profile
- L-angle made to measure
- Parapet coping made to measure
- Verge flashing made to measure
- Eaves flashing made to measure
- Wall flashing made to measure
- Valley flashing made to measure
- Plinth profile made to measure
- Aluminium wall coping
Your own shape? Draw a partHoles, cut-outs and bends in the part designer. Instant price, from 1 piece. Thicknesses
| Thickness | Weight | 500 × 500 mm, 1 piece | Sheet formats |
|---|---|---|---|
| 1.5 mm | 4.05 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
| 2 mm | 5.4 kg/m² | Price | 2,000 × 1,000 mm · 2,500 × 1,250 mm · 3,000 × 1,500 mm |
Prices net, plus VAT and shipping; material, cutting and set-up are included in the unit price.We cut your size from these sheets; the largest part is determined by the largest format.
Material
Coil-coated aluminium sheet arrives with a finished paint surface in traffic white. If you need a light, even visible surface, you save the whole step of subsequent coating. Cutting, bending and installation are all that is needed.
Key data
| Designation | Aluminium, coil-coated in RAL 9016 |
|---|---|
| Density | 2.7 kg/dm³ |
| Thicknesses | 1.5, 2 mm |
| Surface finish | Factory-painted, with protective film. Only peel off the film after installation. It protects during handling and bending. |
Material Aluminium painted RAL 9016: properties, applications, bending →
Tolerances
We cut rectangular blanks on the guillotine shear. DIN ISO 2768-m applies to length and width; the cut edge is sheared, and a slight roll-over and a burr are normal in production. Details: Tolerances.
Bending: minimum flange and inside radius
| Thickness | Minimum flange | Inside radius | Hole to bend edge |
|---|---|---|---|
| 1.5 mm | 11.9 mm | 3.4 mm | 9.7 mm |
| 2 mm | 12.1 mm | 3.8 mm | 9.7 mm |
From our production in Frankfurt
We cut, laser and bend your sheet in-house, on Hanauer Landstraße.
Other Aluminium sheets
- Aluminium AlMg1 anodised E6/EV1 (natural)
- Aluminium AlMg3
- Aluminium AlMg4.5Mn0.7 (EN AW-5083) H111
- Aluminium Al 99.5 hammered finish H14/24
- Aluminium sheet painted anthracite RAL 7016
- Aluminium chequer plate
All materials for sheet metal cutting → · Materials at a glance · Holes or cut-outs: Part designer